亚洲中文综合-91嫩草传媒网址-三级精品-国产不卡二区-国产精品久久久久久久海的味AV-www.无码在线
XR-320
Check the main design according to the design size: XR-320 inside
|
Icon code |
Design size |
Tolerance |
|
A |
33.80 | Minimum value |
| B | 60.20 | The maximum value |
| C | 5.00 | Minimum value |
| D | 47.00 | Reference |
| E | 37.00 | Reference |
| F | 1.60 |
±0.10 |
| G | 94.80 | The maximum value |
| H | 84.00 |
±0.30 |
| I | 2.10 |
±0.10 |
| J | 3.70 |
±0.10 |
| W | 1.30 | Reference |
● Detection tool:digital caliper or micrometer.
● Indicate the code for inspection.
● The number of outlet slots is 5×2.
● hole A is not roundness≤0.40mm,both sides of the hobbing plane of the parallelism≤0.40mm,no significant warping.
● hole hole anastomosis is not allowed to have a step,feel smooth and unimpeded.
● no residual shape or damage,color is no different normal
● finish up to▽7 or more,but allow for harmless scars and miniatures.
● Metal-free impurities or other debris,containing metal,debris products,must be waste separation.
● no melting marks,no internal pores bright spot.There are stomatal highlights(excluding melting marks)products for foreign goods.
● no flash,burr and excess material.Key parts of the burr≤0.05 mm.
● anti-pressure≥25 kg/square centimeter,no damage.
● feel a strong elasticity,and not brittle.
● hardness,wear resistance are suitable for high-speed heavy-duty rotation.
● Selection of raw materials must meet the requirements of the EU ROHS directive,and has UL yellow card certification and fixed-point supply.
● heat distortion temperature≥120 degrees Celsius,insulation resistance must be≥1000M ohm,flame retardant UL94Vo level/0.8-3.2mm.
● other structures should meet the transformer manufacturing process as the standard.
According to the design to check the main design size: XR-320 outside
|
Icon code |
Design size |
Tolerance |
| K | 47.40 | ± |
| L | 60.00 | The maximum value |
| M | 5.00 | Minimum value |
| N | 50.00 | ± |
| O | 1.30 | ±0.10 |
| P | 89.50 | ± |
| Q | 78.60 | ±0.30 |
| R | 1.50 | ± |
| S | 1.30 | ± |
● Detection tool:digital caliper or micrometer.
● Indicate the code for inspection.
● The number of outlet slots is 7×2.
● hole K is not roundness≤0.40mm,with the inner shell D size with the appropriate fit.
● hole hole anastomosis is not allowed to have a clear step,two pieces of flat after no obvious warping,splicing seam≤0.20mm.
● shape no defect or damage,allowing anastomosis in the absence of defects,color is no different normal
● finish up to▽7 or more,but allow for harmless scars and miniatures.
● Metal-free impurities or other debris,containing metal,debris products,must be waste separation.
● no melting marks,no internal pores bright spot.There are stomatal highlights(excluding melting marks)products for foreign goods.
● no flash,burr and excess material.Key parts of the burr≤0.05 mm.
● anti-pressure≥25 kg/square centimeter,no damage.
● feel a strong elasticity,and not brittle.
● Selection of raw materials must meet the requirements of the EU ROHS directive,and has UL yellow card certification and fixed-point supply.
● heat distortion temperature≥120 degrees Celsius,insulation resistance must be≥1000M ohm,flame retardant UL94Vo level/0.8-3.2mm.
● other structures should meet the transformer manufacturing process as the standard.
